落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-16 03:15
浏览次数:2194
摘要:
ASTMD495耐高压低电流电弧放电试验机

高电压值小电压电流冲击试验装置仪(耐电弧放电冲击试验装置仪)-(换算机的控制)

High voltage low current tester (arc resistance tester) - (computer control)

好产商品编码称:耐电弧试验机

Product name: electric arc resistance tester

护肤品规格:NDH-A

Product model: NDH - A

需求规定:GB/T 1411-2002《胶体绝缘带食材耐高偏低电流大小弧光释放电能的耐压试验》(符合IEC  61621-1997)及ASTM D495等规定的必须装修设计生产加工的,并贴合IEC 149、UL 746A等检验的办法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

最主要的适用于的范围及功能性:

本可靠性测试英文仪是遵循软件应适用减速机、电子产品和生活费电子产品等服务行业的电工维修用橡胶、不饱和聚酯树脂胶和隔热漆等隔热原料的耐焊弧效果评比,主适用膏状隔热原料如:橡胶、聚酰亚胺膜、不饱和聚酯树脂、白云母、瓷砖、钢化玻璃、隔热油、隔热漆、硬纸板等媒介的耐焊弧效果测试英文;

本冲击研究设计报告机由计算公式机调控电脑运行,能能表现现行研究设计报告的状态及研究设计报告时长,研究设计报告结束后后并存储现行研究设计报告动态数据,并可缩印.标准的测试检测结果。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该机为下上合二为一格局,下处为操作流程软件,上方为实验设计箱。

2 本厂品所采用*新智力控住技能,用选择流程(IEC或ASTM)可电脑自动开展耐压,并在电脑主机上彰显测试期间和效果。

3 **程度很好,抗干忧程度强,测试方法精密性高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 焊弧通断事件误差值:需小于 ±10ms

2 调压器存储量:2kVA

3 额定的疲劳试验电阻:12.5kV

4 检测电流值误差:±3%

5 电压保持精确度:±10%  电流大小量测计算精度:1.5%

6 金属电极对试件气压:(0.5±0.05)N

7 电极片建材:钨棒

8 电级长度:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 用环保平均温度:(23±2)℃

10 适用区域环境对空气相对湿度的:(50±5)%

11 主机电源:220V±5%  50Hz  10A

12 做实验的时候    的办法:   国家行业标准/美标/10 mA 累计/20 mA 连着/30 mA接连/40 mA多次

13 冲击试验程序流程有以下:

子程序段

脉冲交流电

mA

电孤通断时长s

各小程序段快速时期s

做实验的时候总时s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

连继通

60

240

5

20

连续式通

60

300

6

30

连续不断通

60

360

7

40

间断通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

序列号

品牌

数目

自己的名字

01

耐脉冲公测仪

一架

 

02

探针系统化

1套

 

03

参比电极网架支座

一个

 

04

电原缆线

五套

 

05

保护接地放**

一个

 

06

工作电流毫安表

一部

 

07

电脑上测控軟件

这套

 

08

样品架

一枝

 

09

电极片离规范标准块

2块

 

10

方面规范块

2块

 

11

瓷器片

2片

 

12

喷墨彩印机

1台

公司

13

估算机

1台

品牌标志

14

实用证明书

1份

 

15

登记证证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 护肤品材质:

NDH-A    耐弧光疲劳试验仪-微机设定

NDH-B    耐脉冲经过多次实验发现仪-摸屏操控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪